General Terms and Conditions, Terms of Payment, Legal Fees & Disputes:
Payment is due when invoices are received unless credit terms have been extended with credit references supplied. If payments for past orders are not received, we reserve the right to cancel future orders. After 30 days, unpaid invoices are Past Due. After 60 days, the account is marked delinquent and may be placed with our collection service. Balances unpaid after 60 days will be charged interest at the rate of 1.5% per month. Expenses incidental to collection including; court costs, fees, expenses and reasonable attorney(s) fees equal to 18% of the unpaid balance will also be charged to any account placed with our collection service. Clients shall identify to OUTLAW GRAPHIX in writing any dispute concerning an invoice within ten days of the date of the invoice. If disputes are not identified in writing, the Client has accepted the invoice. Clients must return to OUTLAW GRAPHIX any and all work in dispute, accompanied by written explanation. After investigation, errors on our behalf will either be corrected or credited to the Client’s account.We cannot accept responsibility for consequential damages or loss of any kind resulting from the sale, installation, or delivery of our wrap products. It is the clients responsibility to read our FAQ frequently asked questions documentation available on our website prior to contracting OUTLAW GRAPHIX to perform any vehicle wraps. All quotations are valid for 30 days.
PAYMENT TERMS: A 50% deposit is required at time of order write-up, prior to printing, with the balance to be paid prior to collection or delivery of the vehicle. Once the work is performed and client takes possession of the vehicle, the client must pay OUTLAW GRAPHIX the balance due for the vehicle wrap. The client will be responsible for the payment of all work and designs performed by OUTLAW GRAPHIX on behalf of the client. Any invoice amount not paid within 15 days of wrap completion is subject to a 1.5% fee per month, or part of month will be added to the original invoice.
CONDITION OF VEHICLE PRIOR TO WRAP INSTALLATION: Vehicles must be delivered to our location clean and free from grease, dirt, oil, and free from existing graphics. A cleaning charge of $80.00 may be applied if the vehicle is not in a satisfactory clean condition suitable for a quality wrap installation.
All signs remain the property of OUTLAW GRAPHIX until paid for in full. Pending payment for goods supplied, the customer holds the goods as the property of OUTLAW GRAPHIX and the goods must be kept identified as belonging to OUTLAW GRAPHIX. In the event that the customer fails to make payment, the customer irrevocably authorizes OUTLAW GRAPHIX to remove the graphics supplied.
DELIVERY & PICKUP: While we would like you to arrange your own driver (using your preferred delivery method), we are willing to either select our own delivery person or provide a dedicated delivery at clients expense plus overhead charge.
RETURNS: If the client has a concern with the job, client must contact OUTLAW GRAPHIX, IN WRITING before proceeding with any charge backs or credit returns. OUTLAW GRAPHIX will be given 30 days opportunity to correct and resolve any disputes prior to any legal action or credit returns.
All printed materials produced by OUTLAW GRAPHIX including vehicle wraps, banners, signage, but not limited to, are custom made projects that are not refundable. If the client has a concern with the job, Client must contact OUTLAW GRAPHIX in writing before proceeding with any charge backs or credit returns. OUTLAW GRAPHIX will be given the opportunity to correct and resolve any disputes within 30 days by fixing the disputed project. Since all jobs are custom products, OUTLAW GRAPHIX must be given the opportunity to reprint or reinstall any job, before the client issues any credit card charge backs or returns. In the event that the client issues a credit card charge back, or alleges he does not authorize the credit card transaction, the credit card company will issue an inquiry. When the credit company investigates the claim and if the credit card company’s decision is made in favor of OUTLAW GRAPHIX the client will be held liable for all legal fees and professional research and discovery time associated with OUTLAW GRAPHIX having to file an Inquiry / Retrieval request by the credit card company.
If a credit card dispute is decided in favor of OUTLAW GRAPHIX and if OUTLAW GRAPHIX suffers any loss of credit card business associated with a clients charge back request, the client will be liable for all legal fees and any credit card business OUTLAW GRAPHIX is not able to process during this period of the dispute resolution. In the event that the customer fails to make payment in full on the job invoice, the customer irrevocably authorizes OUTLAW GRAPHIX to remove the graphics supplied.
ESTIMATES & TAXES: Estimates are good faith estimates based on job specification information provided and current material costs. Pricing and schedule are subject to change upon receipt of artwork and approval of estimate. Pricing is good for 10 days from the date of the quote and does not include packaging or shipping charges unless specified. Estimates are contingent upon strikes, accidents, fire, availability of materials and all other causes beyond our control. OUTLAW GRAPHIX minimum order is $150 and we require a 50% deposit upon approval of estimate/order and 50% upon delivery based on agreed terms unless otherwise negotiated up-front. The Client order is subject to applicable state and local taxes unless we have a Government Sales Tax Use and Exemption form completely filled out denoting that said corporation is exempt from sales tax. Appropriate taxes will be applied to outstanding invoices until we receive this document.
JOB CANCELLATION & ERRORS: If the Client cancels the order before its completion, the Client shall be responsible for the cost of any proofs, artwork, materials re-stocking and work performed until cancellation notice is received in writing. In addition, OUTLAW GRAPHIX reserves the right to charge a 15% cancellation charge in addition to the actual charges to cover unbilled internal costs including but not limited to scheduling, client communications and resources utilized. OUTLAW GRAPHIX will gladly re-image any job that has problems due to an error on the part of OUTLAW GRAPHIX. This does not include software limitations or improper set-up of a job. OUTLAW GRAPHIX will not be held responsible for errors in work after final client sign-off or neglect of final sign-off. No claims will be honored after 24 hours of receipt of any completed and delivered work.
Any verbal order will be accepted, but in the absence of any supportive documentation, OUTLAW GRAPHIX will not be responsible for any verbal mistakes.
EVERYTHING MUST BE IN WRITING. OUTLAW GRAPHIX will not accept responsibility for the inaccuracies in orders telephoned or faxed by the customer.
LIMITATION OF LIABILITY & CONFIDENTIALITY: OUTLAW GRAPHIX’s liability for materials submitted by Client that are damaged, lost, or not returned to the Client is limited to the replacement of the unused material. Original artwork is left at the Client’s risk and is not subject to replacement. OUTLAW GRAPHIX will not assume liability for damaged or lost files, only the damaged or lost media will be replaced. OUTLAW GRAPHIX and the Client understand that during our business relationship, both parties may make known to the other, confidential information and business trade secrets. It is OUTLAW GRAPHIX’s policy to treat such information as confidential and we expect the Client to do the same.
PROJECT START TIME, SUBSTRATES & INSTALLATION: The start time of any project does not begin until ALL support files and items related to completion of the job are in house, the Client approves the artwork and the Client is accepted for billing terms. OUTLAW GRAPHIX will consult with the Client to determine the substrate and process that will best suit the needs and conditions set forth in the scope of the project. Ultimately, the Client accepts full responsibility for determining if said purchased item will perform to their requirements on the substrate(s) to which they are applied. OUTLAW GRAPHIX cannot control weather conditions which may result in delays with installation. As such, additional labor and/or travel costs may be incurred which are to be paid by Client. We reserve the right to determine the point at which weather conditions become too adverse to continue work.
TRADEMARKS & COPYRIGHTS: Reproduction in any form, of copyrighted materials without prior permission of the originator is illegal. It is the responsibility of the Client to obtain said permission. OUTLAW GRAPHIX is in no way responsible for obtaining permission and assumes that the Client has obtained permission before the work is submitted.
DESIGN & PRINTING: The design, name or mark, or other material in final form that is approved by the Client and selected for use will be the exclusive property of the Client upon final payment of all amounts due. The designed artwork can be provided via client’s own flash drive due to the large file sizes involved with vehicle wraps. All other designs, names, marks and other materials developed in the course of the project shall remain the property of OUTLAW GRAPHIX, as is customary in our industry. The Client’s ownership of legal rights in the final form of the item it selects is exclusive to the extent provided by applicable national and international laws. Legal protection and appropriate registration of a design, name, mark or other material developed by OUTLAW GRAPHIX is the responsibility of the Client. OUTLAW GRAPHIX will store artwork and a fee will be associated with any and all files that are stored to be used at a later date if kept over 1 year, upon the request of the Client.
All work undertaken is under the condition that a complete, high-resolution file is supplied, complete with a color proof, pantone references and purchase order with the exact specification. Where artwork is supplied by the client, it is the responsibility of the client to ensure the artwork is in a “print ready” format. It is the responsibility of the clients designer to check the dimensions and layout of the actual vehicle(s) for proper formatting and use of a certified vehicle template must be used in order to provide a high quality wrap installation.
When OUTLAW GRAPHIX receives original logos or artwork, we will not modify the color or design, because it may cause unacceptable errors. OUTLAW GRAPHIX will not be held responsible for any design layouts provided by the client. All original art must come to OUTLAW GRAPHIX ready to print. There will be a design fee for any changes made to client supplied art or layout. Design fee is $75.00 per hour.
Where OUTLAW GRAPHIX provides the artwork, it is essential for the client fully check the final proof with the actual vehicle to check for any variations (eg; style of lights, positioning of number plates and other major (no. of doors) or minor variations.
The accuracy of the templates provided has a margin of error of a few percentage points. It is recommended that designers design vehicle wraps with this in mind, avoiding the extreme edges of the wrap with vital information. Measurement of the vehicle is always recommended. See our ARTWORK GUIDE, available on our website for more detailed advice and information.
It is the responsibility of the client to provide or purchase quality high resolution pictures for large format printing. OUTLAW GRAPHIX will not be held responsible for low resolution images provided by the client for printing.
Paint is a smooth liquid spray application, where a vinyl wrap is printed onto a vinyl film using a high resolution large format inkjet printer. An inkjet printer print head passes over the vinyl 8 times to create a 1 inch area of coverage and will never print onto the vinyl with the same smooth characteristics of a smooth liquid sprayed paint job. Most car paints look completely smooth when get up close to them and look at the paint from 6 inches. If you walk up to an inkjet printed wrap and look at it up close at 6 inches you will see evidence that it has been printed using an ink jet printer. In most cases if you look at the wrap up close at 6 inch’s you will see what is called banding. This is a term to describe the horizontal print passes that occur during the printing process. This is mostly apparent on solid colors with not effects or texture in the design. Since most wraps are designed to be viewed as a moving billboard for advertising purposes this is not a major issues for most clients and is considered an acceptable condition with vehicle wrap used for commercial advertising. Paint is also consistent in its color saturation. When you paint an entire car with a solid color you will get a smooth consistent color on the entire surface. When you wrap a car with a printed vinyl the color may shift slightly between 52 inch panels and also the color may shift slightly in certain areas when the installer has to heat the vinyl to make the vinyl conform to complex curves. This color shift on complex curves is mostly apparent when solid coverage colors are used in the wrap. Again, These conditions are typically accepted as a limitation of the vinyl wrapping process and is an acceptable condition for commercial vehicle advertising where the advertising will be viewed on a moving vehicle from a standard viewable distance of 15 feet or more away from the vehicle.
In the case where a third party design firm is involved on behalf of the client, Outlaw Graphix will consult and advise the third party design firm as part of the OUTLAW GRAPHIX work order agreement, free of charge as long as OUTLAW GRAPHIX performs the printing and installation. The client will be responsible for all OUTLAW GRAPHIX consultation fees, if the client decides to take the project elsewhere for printing and installation. Since OUTLAW GRAPHIX designs all our wraps, OUTLAW GRAPHIX uses the original large format design files for the purpose of printing and installing the large format wraps we produce in house. OUTLAW GRAPHIX typically does not design a large format wrap project for another wrap company to print and install unless a special prior arrangement has been made. OUTLAW GRAPHIX reserves the right to keep all the original Photoshop, Corel Draw and Illustrator files created for Large Format printing. These files include all original layered JPG and PSD files. for a separate design fee, OUTLAW GRAPHIX will provide design and printing for business cards, flyers and brochures. Once the OUTLAW GRAPHIX project is complete, the client may choose to purchase the design files from OUTLAW GRAPHIX archived on a CD so they can use it on another print advertising.
Additional File Set-up/Design Charges and Color Matching: If the Client’s files exceed the determined file set-up rate included in price of project, charges will be based on a rate of $75/hour with a $50 minimum and billed in 15 minute increments after the minimum is met. The Client will be notified of this charge prior to work being started and we require Client authorization before proceeding. If OUTLAW GRAPHIX is creating original artwork, design will be billed at a rate of $75/hour. Color matching charges are $75. Due to the nature of both screen and digital printing, we cannot match PMS colors exactly and give no guarantees to precise color matches. For the $75 charge, we will provide a press match swatch on the substrate chosen for the Client’s project and once approved, print within 10% match to that swatch.
CUSTOMER SUBMITTED ARTWORK OR GRAPHICS:
All artwork or designs and images must be provided in CMYK format, excluding products labeled otherwise*. Outlaw Graphix is not responsible for any color shift that occurs in conversions from RGB to CMYK color modes or converting from CMYK to RGB.
Outlaw Graphix is not responsible for PANTONE® Matching System colors dropping out or converting to incorrect colors when converted to CMYK
All artwork, designs and images provided for offset printed items such as business cards, postcards, brochures, catalogs, etc. must be provided in a minimum of 350 DPI and CMYK color mode (unless otherwise stated). For all large format printing services, a minimum of 150-300 DPI is requested for optimal output.
Outlaw Graphix is not responsible for images printed as fuzzy, distorted or pixelated due to customer providing low-resolution, RGB or otherwise incorrectly-prepared artwork. Outlaw Graphix will review artwork prior to printing and inform the client if artwork is of low resolution.
Outlaw Graphix is not responsible for overprint designs or non-flattened files printing in error.
Outlaw Graphix is not responsible for production delays caused by customer file errors, including any delays caused by customers requesting or needing to re-upload files due to not meeting proper print specifications.
COLOR PROOFING, MATCHING & PRINTING
We cannot guarantee 100% color match. We are able to match your color up to 85%, so there might be a 15% shift in color when your product is printed. We recommend limited usage of blues and reds, simply because they are the hardest colors to match.
Outlaw Graphix is not liable for color matching or ink density on screen proofs approved by customers. Screen proofs will predict design layout, text accuracy, image proportion, and placement, but not color or density. It is the customers responsibility to request color samples at an additional fee if color matching is a requirement. Color matching is waived on all rush orders in order to make less than 7 business day turn arounds.
Outlaw Graphix will try its best to match the gradient density of each color, but Outlaw Graphix is not liable for the final appearance of a color.
Important: Gang-run printing is the process by which multiple (and different) customer jobs are combined on a large print sheet and are run at the same time. For example, we lay out 65 different customer business cards and postcards on one gang-run sheet, and run the sheet 1000 times to get 65 sets of 1000 cards. Each card set is a different card. This process allows us to spread the expensive initial setup cost of running a full-color offset print run among 65 customers.
The application of High Gloss UV Coating may affect or change the appearance of printed colors. Outlaw Graphix is not liable for the final color appearance of High Gloss UV-coated product’s.
Use of Images and References to Completed Work: OUTLAW GRAPHIX may, at its sole discretion, use images of completed work and/or refer to Client in OUTLAW GRAPHIX’s portfolio and any other marketing materials, including but not limited to press releases, brochures, flyers, signs, postcards, website and vendor marketing materials promoting OUTLAW GRAPHIX and its services.
Vehicle Wrap: Additional Terms, Conditions and Warranty Disclaimer:
INSTALLATIONS: Graphics and alignment as applied to vehicle may not be precisely matched to the digital images (“proofs”) produced for Clients review. Graphics applied to vehicles are intended to be viewed from a distance of at least twenty feet and OUTLAW GRAPHIX produces each vehicle graphic with the detail and quality appropriate for viewing from such distance. OUTLAW GRAPHIX only guarantees final prints designed and set-up by OUTLAW GRAPHIX for print. OUTLAW GRAPHIX voids warranty on express rush same day printing and lamination wherein installation schedule prohibits proper 24 hour print curing. OUTLAW GRAPHIX expressly disclaims all warranties regarding paint jobs on non-standard OEM cars and trucks. Outlaw Graphix expressly disclaims all warranties on buses, planes, trains, RVs, custom vehicles and vehicles with OEM paint that is more that 6 years old. If we are asked to cover existing vinyl decals, we cannot be liable for any damage caused during the installation or removal process to these decals.
Although we try to make the wrap look like a paint job, it is NOT paint. There may be extreme curves and bumps such as rivets and deep channel curves and moldings on the vehicle that the vinyl will no be able to conform to. In some small areas you will see evidence of the original color of the vehicle below the wrap. These may be small areas such as around door handles and the edges of the lights on the vehicles. A vehicle wrap is made by applying 52 inch vertical panels of vinyl. There will be 1 inch seams where the panels meet. On a complex design with many matching points, OUTLAW GRAPHIX can not guarantee that the graphics will match 100% alignment due to extreme complex curves on the vehicle. a 5% margin is considered acceptable on large outdoor advertising projects.
Proofs are created on a flat surface and viewed at a relatively tiny size on computer screens and 8 inch printed paper. In cases of curves, handles, deep grooves, rubber moldings/trim, on-the-spot adjustments may be made by the installer to assure maximum readability or alignment. In many cases there are slight differences between the printed flat paper proof and the 3 dimensional curved vehicle wrap.
Due to the fact that a two dimensional print is being applied to a three dimensional vehicle and due to the minor variances in the accuracy of the templates. The positioning of a vehicle wrap can vary from the proof by several cms throughout the entire length of a vehicle wrap. This is normal and wraps need to be designed with this in mind.
It is not reasonable to expect a inkjet printed vinyl wrap to cover and look exactly like paint or in all the same places look exactly the same. A piece of vinyl has limits and can only stretch so much before it changes color. In some cases, a relief cut have to be made into the vinyl that will reveal a small amount of the original vehicles paint color under the vinyl. In some cases a patch needs to be installed to conceal vehicles original color. It is the only option. Areas under door handles, mirrors, behind gas caps, and inside door frames will not be wrapped. If we wrap Extreme curved surfaces such as mirrors and bumpers they may reveal the original paint color at the tight edges of the wrap. It has more to do with material limitations and not install quality.
If we are installing at the client’s nominated location, suitable conditions must exist. Vehicles need to be indoors, in a clean, dust free temperature controlled environment, with a power supply and good quality lighting. With a minimum of 5 feet working space around the entire vehicle. If in the opinion of the senior installer on site, conditions are not suitable for the a high quality install of the wrap / graphics the vehicle will be required to go to one of our nominated install location. Wraps are self-adhesive vinyl that will only adhere well to catalyzed vehicle paint and glass. Poor surface paint or clear coats will not allow the vinyl adhesive to stick properly and the adhesive may fail. It is the responsibility of the vehicle owner to bring in a vehicle that is ready to be wrapped. Extreme curves and deep pockets may exceed the limits of how far the material can stretch. Again this is not paint it is a special pressure sensitive vinyl material. Vehicles are not at exact right angle curves. They maintain lines that are not 100% parallel to the ground. Due to this fact the graphics that are 2D printed graphics they will not be at the exact same angle of the vehicle lines once the wrap is installed onto the 3D vehicle surface.
Due to the limitations and the sensitivity of the various substrates, it is impossible to reproduce all colors accurately. Therefore, in the absence of a representative from your company to select the appropriate color sample, reproduction will be at our discretion. When we wrap over existing vinyl strips or letters, the new wrap is so thin on top that there will be evidence that there is old vinyl underneath the new vinyl. OUTLAW GRAPHIX can not be held responsible for any damage void of vehicle warrantee or anything caused through the application of the vinyl products. OUTLAW GRAPHIX is not liable if during the installation of a wrap the clear coat of the car begins to peal off. Original painted vehicles will not have any problems with the clear coat pealing off.
The application process in many cases takes no longer than a day or two for full wraps and partial wraps can be done within one day. Its not a good idea to rush the install process many things can go wrong. Also OUTLAW GRAPHIX reserves the right to take an additional day for issues such as transportation and weather conditions.
It is illegal to cover the front driver side glass. In some cases the police may also stop you for covering the passenger side glass. The reason is the police need to see into the vehicle. In some cases they client may insist that the passenger side is wrapped in the design and OUTLAW GRAPHIX will wrap it with the disclaimer stating the client is responsible for any issues regarding the coverage of the front windows.
The wrap material that is used for vehicle wraps, does not stick very well to plastic or rubber parts such as window trims, side plastic moldings and plastic door handles. It is advised that these areas NOT be wrapped with adhesive vinyl. Initially the vinyl will stick , but over a short period of time such as a few months, the vinyl will fall off these areas.
In most cases of vinyl lifting, if it is a materials problem the lifting will present itself in the first few weeks after the initial installation. In most cases it is advised that the vehicle wrap be fixed so that the vinyl does not continue to peal back and become contaminated. It is not uncommon to see small areas of the wrap lifting soon after the installation is complete. Several factors can effect the vinyls’ adhesives ability to stick to the vehicle surface. Here are a few.. If the surface is not prepared properly before the wrap then the adhesive can fail to stick overtime. Extreme temperatures can effect the vinyl adhesive. Very Cold or Very Hot temperatures. Extreme humidity in the air during installation can effect the adhesive.Dust in the air during installation.
OUTLAW GRAPHIX prefers to use our facility for installation. If client elects to have installation performed at a non OUTLAW GRAPHIX location, OUTLAW GRAPHIX will not be held liable for any issues related to improper install conditions such as temperature or dust.
Full wraps DO NOT automatically include the roof wrap. The additional cost of labor and materials to wrap a roof can range from $150.00 for a small car, up to $400.00 for a Cargo van roof wrap. Most clients do not wrap the roof of their vehicles.
These prints take time to print and the ink has to dry before we can laminate the prints. After the prints are ready to install the installers can begin the installation. You do not want to rush the installers because this type of work is all done by hand and it takes time do install the vinyl with perfect placement. From the time that the design is completed and approved by our client, a wrap can be printed and installed within 10 days. In some cases it can all be completed in 5 days after the design is approved.
The vinyl that is applied to original vehicle paint is warranted against adhesive failure and image quality for up to 4 years using 3M vinyl. 2 to 3 years for other types of vinyl. The window perforated material is warranted for up to 1 years. OUTLAW GRAPHIX can not warrantee the installation if we do not install the wrap. If OUTLAW GRAPHIX only prints the vinyl OUTLAW GRAPHIX will warrantee image quality only.
REMOVALS: All removals are quoted separately. Wrap removal can be very time consuming we charge by the square feet and by the hour for the labor. OUTLAW GRAPHIX can not be held responsible for any paint damage or existing striping damage when we do a removal. Since we do not know the integrity of the existing paint job or the condition of the painted clear coat or the condition of any existing decals. OUTLAW GRAPHIX can not be held liable if during the removal of the wrap the clear coat is peeled back with the wrap. In some cases if you have existing vinyl stripes under the wrap ( such as an RV that has striping) or a bus, we can not be held liable if portions of the stripes get removed during the wrap removal. Over the years of sun exposure prior to the wrap the striping adhesive can become weak and in some areas the striping will come up as the wrap is removed. OUTLAW GRAPHIX does not use any steel or metal knives during the removal process. In some extreme cases when the wrap has been on the vehicle for more than 5 year the wrap may no longer be removable so the vehicle may need to go to a body shop to be sanded and repainted. If the vehicle requires a body shop, OUTLAW GRAPHIX will refer the client to a body shop and client shall be responsible for paying the body shop fees.
We cannot be responsible for damage to paintwork when the vinyl is removed, and would not advise application on a re-sprayed surface, or poor quality/rusted paintwork. Please note, our experience shows that removal of vinyl designed for vehicle wraps, from good quality, factory original paintwork, will not damage the paintwork. However, it is the duty and responsibility of the owner of the vehicles to ensure suitability of the existing surface before it is wrapped. In the event that OUTLAW GRAPHIX is asked to remove pre-installed vinyl, installed by a company other than OUTLAW GRAPHIX, OUTLAW GRAPHIX will make every effort to remove the existing vinyl, but will not be held responsible for any damage they may occur to the surface of the painted vehicle after removal. This is due to the fact that not all preinstalled vinyls are designed to be removed. In many cases pre existing vinyl are non-removable. When we wrap over existing vinyl strips or letters, the new wrap is so thin on top that there will be evidence that there is old vinyl underneath the new vinyl. OUTLAW GRAPHIX will not be held responsible in anyway if the client is not happy because the existing graphics were not able to be removed using conventional methods of removal.
Also we do not advise using non-removable vinyl on a vehicles surface. Please note, our experience shows that removal of vinyl designed for vehicle wraps, from good quality, factory original paintwork, will not damage the paintwork. However, it is the duty and responsibility of the owner of the vehicles to ensure suitability of the existing surface before it is wrapped.
It is standard procedure in our industry to wrap over existing graphics when it can not be removed using conventional methods. OUTLAW GRAPHIX will not be held responsible in anyway if the client is not happy because the existing graphics were not able to be removed using conventional methods of removal.
OUTLAW GRAPHIX does NOT engage in unconventional methods of vinyl graphics removal because it may damage the surface of the clients vehicle. Unconventional methods include, cutting or scraping of the vehicle surface or the use of harsh chemicals that may damage the vehicles painted surface.
In the event that OUTLAW GRAPHIX is asked to remove pre-installed vinyl, installed by a company other than OUTLAW GRAPHIX, OUTLAW GRAPHIX will make every effort to remove the existing vinyl, but will not be held responsible for any damage they may occur to the surface of the painted vehicle after removal. This is due to the fact that not all preinstalled vinyls are designed to be removed. In many cases pre existing vinyl are non-removable. If this is the case, OUTLAW GRAPHIX will wrap over the existing vinyl with vinyl designed for vehicle graphics.
All removals are quoted separately. Wrap removal can be very time consuming we charge by the square feet and by the hour for the labor. OUTLAW GRAPHIX can not be held responsible for any paint damage or existing striping damage when we do a removal. Since we do not know the integrity of the existing paint job or the condition of the painted clear coat or the condition of any existing decals. OUTLAW GRAPHIX can not be help liable if during the removal of the wrap the clear coat is peeled back with the wrap. In some cases if you have existing vinyl stripes under the wrap ( such as an RV that has striping) or a bus, we can not be held liable if portions of the stripes get removed during the wrap removal. Over the years of sun exposure prior to the wrap the striping adhesive can become weak and in some areas the striping will come up as the wrap is removed. OUTLAW GRAPHIX does not use any steel or metal knives during the removal process. In some extreme cases when the wrap has been on the vehicle for more than 5 year the wrap may no longer be removable so the vehicle may need to go to a body shop to be sanded and repainted. If he vehicle requires a body shop, OUTLAW GRAPHIX will refer the client to a body shop and client shall be responsible for paying the body shop.
ADDITIONAL CHARGES: A $60 fee will be added to the invoice for all vehicles that have not been recently washed (i.e., the vehicle must be clean, not waxed). This fee includes the labor cost of washing your vehicle by our certified installers. To avoid this charge, please wash your vehicle before your installation specialist arrives on-site.
WARRANTY & MATERIALS: OUTLAW GRAPHIX offers a one-year warranty on the installation, one-year on the material applied to the windows and 3 years on the cast laminated adhesive vinyl. 2 year for calendared economy vinyl. No warrantee on horizontal direct sun exposure such as roofs. anything over 10 degree vertical to horizontal is considered no warrantee. The wrap warranty will depend upon the customer’s care of the vehicle and the outdoor/geographic conditions. We recommend hand washing only. Avoid high pressure, power washing and be careful never to use an ice scraper on window graphics. Also avoid harsh chemicals of any kind as they can deteriorate the laminate on the vinyl adhesive. Sweeping or brushing off the windows with a soft broom and the use of a rear defroster will not damage your window wrap. There are specially designed products to clean and polish vinyl graphics if needed. Please wait at least 3 weeks before washing your vehicle once applied.
AGREEMENT: This agreement constitutes the entire agreement between the parties and will supersede all proposals or prior agreements, oral or written and all other communications between the parties relating to the subject matter of this agreement. This agreement may not be varied other than in writing, executed by the duly authorized representatives of both parties. Conditions not specifically stated herein shall be governed by established trade customs. Terms inconsistent with those stated herein, which may appear on Client’s formal order, will not be binding on OUTLAW GRAPHIX. Client acknowledges that Client has read, understands and hereby agrees and accepts these prices, fees, charges, use of images, specification and conditions stated herein and authorizes OUTLAW GRAPHIX to perform all work as specified. Client has also been presented with, has read and understands the color matching criteria and has selected the appropriate method for the design. Client understands that OUTLAW GRAPHIX cannot guarantee the quality of any artwork that is not set-up by OUTLAW GRAPHIX.
Thank you for taking the time to review all the situation variables that can potentially be encountered when working with vehicle wrap jobs. The proper care, maintenance & precautions of your vehicle wrap will allow for years of great looking advertising on your vehicle for everyone to enjoy.
Please feel free to contact us if you have any concerns or are unclear on any of the above mentioned vehicle wrap disclaimers. We will gladly assist you with answers or to help explain anything you do not clearly understand about our vehicle wrap design, manufacture & installation service.